Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 25, 2015 1:08:04 GMT
We went to work on our Cabin today. Using Rough Cut Cedar for trim. I decided to cut the Boards 2 inches wide. So I set the Table Saw for 2 inches.
Later was going to Frame inside of the Windows which had to be 3 1/2 inch wide.
Noticed the saw was now set at 1 3/4 inch. Told my wife I didn't know what had happen but the saw was cutting 1/4 inch narrower.
She says oh I changed it. Didn't give no reason
Once again we talked over the possibility of selling out and moving to the Cabin which would leave us Debt free. After going through things with her Job there is no way we will ever move up there.
Rockpile
|
|
|
Post by copperkid3 on Oct 25, 2015 17:43:55 GMT
Go back and 'ask' her the reason; some of us are dying to know....
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 25, 2015 21:19:13 GMT
Go back and 'ask' her the reason; some of us are dying to know.... She said she wanted to allow for cutting but the boards were wider than they was supposed to be. Rockpile
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 25, 2015 21:26:53 GMT
Oh this morning on way to Church I'm telling her WATCH IT! WATCH IT! Finally she hits her brakes. What? She finally looks at the Buck Deer standing by the road looking at us. Oh I was watching pot holes.
Rockpile
|
|
|
Post by bluemingidiot on Oct 30, 2015 6:23:19 GMT
|
|