|
Post by Jolly on May 27, 2020 14:11:12 GMT
I use tomato cages made from five foot concrete reinforcing wire, but I ran out of cages this year, so I staked what I had left. Some people cage, some stake and some weave.
Which method do you use and why?
|
|
|
Post by grannyg on May 27, 2020 15:19:46 GMT
We use homemade round cages for ours....can easily tie up the stems if needed.....
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on May 27, 2020 15:26:52 GMT
We have a dozen cages made from wire mesh for the raised beds. I tie them all to a stake to start. I use cattle panels and tie to it in the row garden. I plant on the N side of the panel and once they get a foot high, they weave themselves into the panel so no more tying. They want to grow toward the sun naturally....James
|
|
|
Post by Cabin Fever on May 27, 2020 16:06:53 GMT
We use 4' x 16' cattle panels. We use that green velcro to attach the tomato plant limbs to the panel.
|
|
|
Post by mogal on May 27, 2020 16:32:30 GMT
DH made 35 cages from concrete reinforcing mesh. I've also used cattle panels with decent results. I did Florida weave one year and one year only. Dismal failure. Maybe my end supports weren't sturdy enough.
scientificgardener.blogspot.com/2012/05/florida-weave-method.html
|
|
|
Post by tenbusybees on May 27, 2020 17:01:17 GMT
We use 4' x 16' cattle panels. We use that green velcro to attach the tomato plant limbs to the panel. That's what my parents always did except they used pantyhose instead of Velcro. I like the big, colored, round cages.
|
|
|
Post by Jolly on May 27, 2020 18:36:48 GMT
When I use my cages, I drive two t-posts and run a small rope through all the cages. I also take tie wire and wire each cage to the next.
|
|
|
Post by chewytrees on May 27, 2020 18:42:45 GMT
8 foot stakes for me
|
|
|
Post by mzgarden on May 27, 2020 19:38:19 GMT
Weave through cattle panels.
|
|